KF436C18BB2AK2/32

32GB (16GB 2G x 64-Bit x 2 pcs.)
DDR4 3600 CL18 288 Pi DIMM Kit

SPECIFICATIONS

CL(IDD)
Row Cycle Time (tRCmin)
Refresh to Active/Refresh
Command Time (tRFCmin)
Row Active Time (tRASmin)
UL Rating
Operating Temperature
Storage Temperature
17 cycles
45.75ns(min.)
350ns(min.)
32ns(min.)
94 V – 0
0o C to +70o C-40o C to +85o C

DESCRIPTION

Kingston FURY KF436C18BB2AK2/32 is a kit of two 2G x 64-bit
(16GB) DDR4-3600 CL18 SDRAM (Synchronous DRAM) 1Rx8,
memory module, based on eight 2G x 8-bit FBGA components per
module. Each module kit supports Intel® Extreme Memory Profiles
(Intel® XMP) 2.0. Total kit capacity is 32GB. Each module has been
tested to run at DDR4-3600 at a low latency timing of 18-22-22 at
1.35V. The SPDs are programmed to JEDEC standard latency
DDR4-2400 timing of 17-17-17 at 1.2V. Each 288-pin DIMM uses
gold contact fingers. The JEDEC standard electrical and mechanical
specifications are as follows:
FACTORY TIMING PARAMETERS
• Default (JEDEC):
• XMP Profile #1:
• XMP Profile #2:
kingston.com
DDR4-2400 CL17-17-17 @ 1.2V
DDR4-3600 CL18-22-22 @ 1.35V
DDR4-3000 CL16-18-18 @ 1.35V

FEATURES

• Power Supply: VDD = 1.2V Typical
• VDDQ = 1.2V Typical
• VPP = 2.5V Typical
• VDDSPD = 2.2V to 3.6V
• On-Die termination (ODT)
• 16 internal banks; 4 groups of 4 banks each
• Bi-Directional Differential Data Strobe
• 8 bit pre-fetch
• Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop)
• Height 1.69” (43mm), w/heatsink